The SW Conveyor Belt is a new type of structural conveyor belt emerging internationally, accounting for 10% and 20% of the total conveyor belt. Compared with the current whole core conveyor belt, the straight-through conveyor belt is the same strength material, the multi-layer structure is softer than the single layer, and the bending fatigue resistance is good. Therefore, the development and production of such conveyor belt is definitely very good for the tape industry in China.
Single-ply Belting possesses a unique straight-warp carcass , unlike Conventional crimp weave fabrics. The carcass developed is a total departure from the traditional plies belt concept and constructions.it is designed to carry a large capacity of material and hasa Superior endurance performance in rugged environment.
It is a fabric different from the canvas structure. Its warp and weft are at different levels and are not interwoven. Therefore, the warp and weft are in a straight state, without weaving, and the strength of the warp and weft is the highest. The fabric is usually composed of three layers, the middle layer is a warp thread, and the upper and lower layers are weft threads, and the warp and weft threads of the layers are hooked together to form a whole fabric. The fabric is characterized by uniform strength and tear resistance, and can be woven with a higher strength of the conveyor core with a small amount of yarn, so that the strength efficiency of the fiber, that is, the fiber strength retention rate after woven into the fabric is high. The dimensional stability of the fabric is good.